![](https://caleaftech.usa02.wondercdn.com/uploads/image/632ab0af53871.png)
Are you of legal smoking age?
Mi-One Brands uses 3rd party software for age-verification upon checkout. By clicking through and going to mipod.com you agree that you are at least 21 years old.
Opening a Church Vape Cartridge
Church Vape cartridges are a popular product in the vaping community. They are known for their quality, potency, and the variety of flavors they come in. However, there may come a time when you need to open one of these cartridges. It could be because you want to refill it with a different oil or because you simply want to see what’s inside. Whatever the reason, opening a Church Vape cartridge is a straight-forward process. Here are the steps you’ll need to take.
Step 1: Gather your materials
To open a Church Vape cartridge, you’ll need a few materials. You’ll need a pair of pliers, a small screwdriver, and some gloves. You may also want some paper towels or a clean cloth to catch any drips.
Step 2: Remove the mouthpiece
Using your pliers, grab the metal mouthpiece attached to the top of the cartridge and twist it counterclockwise. The mouthpiece should come off easily.
Step 3: Remove the seal
Underneath the mouthpiece, you will see a plastic seal. Use the small screwdriver to pry it off. Be careful not to damage the hole in the center of the seal as this is where the oil flows out.
Step 4: Remove the silicone seal and the coil
Once you’ve removed the plastic seal, you’ll see a small silicone seal at the top of the cartridge. You’ll need to use your pliers to carefully grab the silicone seal and pull it out. Underneath the silicone seal, you will see the atomizer coil. Again, use your pliers to carefully remove it.
Step 5: Refill or inspect
With the coil and silicone seal removed, you can now refill the cartridge with a different oil or inspect the inside. If you’ve decided to refill the cartridge, make sure you don’t overfill it. To reassemble the cartridge, simply reverse the steps. Insert the atomizer coil, followed by the silicone seal, the plastic seal, and finally, the mouthpiece.
In conclusion, opening a Church Vape cartridge is relatively easy. With the right tools and a little bit of patience, you can safely disassemble the cartridge, refill it, and put it back together. However, be sure to follow manufacturers' or users’ guidelines concerning safety and regulation before embarking upon opening a Church Vape cartridge.