how to get bubbles out of vape cartridge

Views: 95 Author: Site Editor Publish Time: Origin: Site

Vape cartridges are an essential part of the vaping experience. They come with different types of oils, such as THC extracts, e-juice, and nicotine formulations. However, the vaping experience can be frustrating if your cartridge has bubbles. Bubbles can affect the flow of oil, causing it to stop working altogether. This article will discuss how to get bubbles out of vape cartridges.

1. Warm the oil

One reason why bubbles form in vape cartridges is due to the temperature of the oil. If oil is cold, it becomes thicker, making it difficult to flow through the wick. One way to solve this is to warm the oil. Here's how to do it:

a. Hold the cartridge with one hand and use the other hand to place a hairdryer at the bottom of the cartridge.

b. Turn on the blow-dryer in low heat and wave it around the base for a few minutes.

c. Rotate the cartridge to ensure that all parts are heated.

d. Take a puff to see if the bubbles have dissipated.

2. Allow the cartridge to sit upright

Another reason why bubbles form in vape cartridges is that they are not stored upright. Oils have different densities, and if not stored upright, the less dense part will settle at the top, resulting in bubbles. To solve this problem, follow these steps:

a. Turn off the vape pen.

b. Unscrew the cartridge from the battery.

c. Place the cartridge upright on a table.

d. Wait for a few minutes to allow the air bubbles to rise to the top.

e. Gently tap the sides of the cartridge to remove the remaining bubbles.

f. Reconnect the cartridge to the battery, and you are ready to go.

3. Remove the air bubble

If the above techniques do not work, you may need to remove the air bubble manually. Here's how to do it:

a. Gently unscrew the cartridge from the vape pen.

b. Hold the cartridge with the mouthpiece down, and gently tap it to move the bubbles up.

c. Insert the needle of a syringe into the cartridge through the bottom, where the air bubbles are located.

d. Position the syringe at the edge of the air bubble.

e. Slowly pull the plunger backwards while keeping the tip of the syringe in the air bubble.

f. Once the air bubble is removed, carefully remove the syringe.

g. Screw back the cartridge onto the battery and start vaping.

Conclusion

Getting bubbles out of vape cartridges can be frustrating, but you can solve it with the techniques outlined above. Ensure that you store your cartridge upright and warm the oil before vaping. If none of these techniques work, you can remove the air bubble manually. However, be careful not to damage the cartridge while doing so. Remember to purchase high-quality cartridges to ensure that you have the best vaping experience.

×

Contact Us

captcha